Skip to main content

Auto Design General Overview

Understand how Auto Design creates an initial solar design, what to review, and when to get help.

What is Auto Design?

Auto Design creates an initial solar design as part of the project-creation workflow in Artemis. The generated design includes roof planes and a solar panel layout. A roof plane is an individual roof surface represented in the design.

Use the generated design as a starting point. Review the roof geometry and panel placement before relying on the design for your project.

How does Auto Design fit into your workflow?

Auto Design generates the initial design during project creation. You can then review and adjust the design in the Design Editor.

The initial panel selection uses your installer’s target production offset setting. Auto Design and Max Fit serve different purposes: Auto Design produces the initial design, while Max Fit is a separate action for an existing project that aims to maximize eligible active panel capacity.

What should I review in the generated design?

Before continuing with your solar project, review:

  • The selected building: Make sure the design represents the intended property and does not include a neighboring roof.

  • Roof planes: Check that the roof outline and individual roof surfaces match the property.

  • Panel placement: Check that panels are on the intended roof surfaces.

Auto-generated roof geometry can require correction. Reviewing the initial design helps you identify changes needed before moving forward.

Can I edit an Auto Design result?

You can adjust an auto-generated design in the Design Editor. Review the panel layout again after changing roof or panel settings, because some changes can affect existing panels.

For example, the documented roof-level panel orientation behavior regenerates and replaces panels on that roof. Do not assume that changing a roof setting leaves the panel layout unchanged.

What if the design needs help?

If the roof geometry or panel layout needs assistance, look for Get design help in the Design Editor. The assistance workflow available to you depends on your organization’s configuration.

Where the Assisted Design confirmation flow is available, confirm that you want the design team involved and provide the requested urgency information. Dismissing or declining that confirmation does not create an assistance request.

Common questions

Does Auto Design always produce a design that needs no changes?

Auto Design results can need adjustments. Check the building, roof geometry, and panel placement before relying on the generated design.

Is Auto Design the same as Max Fit?

Auto Design generates the initial project design. Max Fit is a separate action on an existing project for maximizing eligible active panel capacity.

What if panels appear on the wrong building?

Review the building and roof planes represented in the design. Use the Design Editor to make the necessary corrections, or use the available design assistance option if you need help.

Does selecting an urgency guarantee an assistance turnaround time?

Urgency helps the design team prioritize the request. Do not treat the selected urgency as a confirmed completion time.

Did this answer your question?